Performance

• 20.48 Tbps data switching capacity, 30,476 MPPS forwarding rate

• Store-and-Forward and Cut-Through switching support

• 2.3 micro-second port-to-port latency (64-byte packet)

Density

• 10 GbE Port Density: ––768 wire-speed 10GBASE-X SFP+ ports using 24-port 40 GbE I/O module ––384 wire-speed 10GBASE-X SFP+ ports using 48-port 10 GbE or 12-port 40 GbE I/O module

• 40 GbE Port Density: ––192 wire-speed 40GBASE-X QSFP+ ports using 24-port 40 GbE I/O module ––96 wire-speed 40GBASE-X QSFP+ ports using 12-port 40 GbE I/O module

Scale

• MAC Addresses: 128K

• IPv4 Host Addresses: 16K, up to 28K per switch

• IPv4 LPM Entries: 16K

• IPv6 Host Addresses: 6K

• IPv6 LPM Entries: 8K

• 4,094 VLANs (Port, Protocol, IEEE 802.1Q)

• 9216 Byte maximum packet size (Jumbo Frame)

• 384 load sharing trunk groups, up to 16 members per trunk

• 2,048 ingress and 1,024 egress ACL rules per group of 24 10GbE or 6 40GbE ports

• 1,024 ingress ACL meters and 512 egress ACL meters per group of 24 10GbE or 6 40GbE ports

• Ingress and egress bandwidth policing/rate limiting per flow/ACL

• Egress bandwidth rate shaping per egress queue and per port

• 8 QoS egress queues per port • Rate Limiting granularity: 8 Kbps – 1Mbps

CPU, Memory

• Intel i7 Dual Core 2GHz

• 2GB ECC DDR3 SDRAM

• 1GB Compact Flash LED Indicators

• Per port status

LED for link/packet activity

• System Status LEDs: management, fan, fabric and interface modules and power supplies   

Operating Specifications

• Operating Temperature Range: 0° C to 40° C (32° F to 104° F)

• Operating Humidity: 10% to 95% relative humidity, non-condensing

• Operational Altitude: up to 2000m (6561 feet)

• Operational Shock: 30 m/s2 (3g), 11ms, 60 Shocks

• Operational Random Vibration: 3-500MHz @ 1.5g rms

Packaging and Storage Specifications

• Storage/Transportation Temperature: -40° C to 70° C (-40° F to 158° F)

• Storage and Transportation Humidity: 10% to 93% RH

• Packaged Shock (Half Sine): ––< 50 kg 180 m/s2 (10 g), 6 ms, 600 shocks, modules ––> 50 kg 100 m/s2 (6 g), 11 ms, 600 shocks, chassis

• Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G

• Packaged Random Vibration: 5-20Hz @ ASD=1.0 & 20-200Hz @-3dB/octave

• Packaged drop height ––@ 39.5” <22 lb (10 kg) modules ––@ 11.8” <110 lb (50 kg) chassis

North American Safety

• cULus 60950-1:2007 2nd Ed., Listed Device (U.S.)

• CSA 22.2#60950-1-03 1st Ed. 2006-07 (Canada)

• Complies with FCC 21CFR Chapter1, Subchapter J (U.S. Laser Safety)

• CDRH Letter of Approval (U.S. FDA Approval) European Safety

• CB Scheme, IEC 60950-1:2005+National Deviations

• EN 60825-1:2007 (Lasers Safety)

• 206/95/EC Low Voltage Directive International Safety

• GS Mark, IEC 60950-1:2006 2nd Edition

• AS/NZX 60950-1 (Australia/New Zealand)

North American EMC Standards

• FCC CFR 47 part 15 Class A (U.S.) • ICES-003 Class A (Canada)

European EMC Standards 

• EN 55022:1998 Class A • EN 55024:1998 Class A • EN 55011:2009+A1:2010 • EN 61000-3-2:2006+A2:2009 (Harmonics) • EN 61000-3-3:2008 (Flicker) • EN 61000-6-4:2007 (Emissions for Industrial, Scientific & Medical) • EN 61000-6-2:2005 (Immunity for Industrial, Scientific & Medical) • ETSI EN 300 386 v1.5.1 (2010-4) EMC Telecommunications • 2004/108/EC EMC Directive

International EMC Certifications 

• CISPR 22:2008 Ed 5.2), Class A (International Emissions) • CISPR 24:2010 Class A (International Immunity) • IEC 61000-4-2:2008 Electrostatic Discharge, 8kV Contact, 15kV Air, Criteria A • IEC 61000-4-3:2008+A2:2010 Radiated Immunity 10V/m, Criteria A • IEC 61000-4-4:2004 am1 ed2.1 2011Transient Burst, 1kV, Criteria A • IEC 61000-4-5 2005 Surge, 2kV, 4kV, Criteria A • IEC 61000-4-6:2008 Conducted Immunity, 0.15-80MHz, 10V/m unmod. RMS, Criteria A • IEC 61000-4-11 Power Dips & Interruptions, >30%, 25 periods, Criteria C Country Specific • Japan Class A (VCCI) • Australia/New Zealand, C-Tick (ACMA) • Taiwan EMC CNS 13438(95) Class A, Safety CNS 14336-1(2010) (BSMI) • Mexico (via NRTL Listing) • South Korea KN22, KN24 (KCC)

Telecommunication Standards 

• ETSI EN 300 386 v1.5.1 (2008-04) EMC Telecommunications)

• ETSI EN 300 019 (Environmental for Telecommunications)

IEEE 802.3 Media Access Standards

• IEEE 802.3z 1000BASE-X

• IEEE 802.3ae 10GBASE-X

• IEEE 802.3ba 40GBASE-X

• IEEE 802.3ac VLAN Tag

• IEEE 802.3ad Link Aggregation

Transportation Standards

• EN/ETSI 300 019-2-1 v2.1.2 – Class 1.2 Storage

• EN/ETSI 300 019-2-2 v2.2.1 – Class 2.3 Transportation

• EN/ETSI 300 019-2-3 v2.2.2 – Class 3.1e Operational

• EN/ETSI 300 753 v1.2.1 (2009-7) – Acoustic Noise

• ASTM D3580 Random Vibration Unpackaged 1.5G

Fan and Acoustic Noise 

• Sound pressure for comparison to legacy standards ––Low Speed: 60.3 dB(A) per ISO 7779:2010 ––Medium Speed: 66.0 dB(A) per ISO 7779:2010 ––High Speed: 82.3 dB(A) per ISO 7779:2010 • Sound power in accordance with EN 300 753 v1.3.1 (2011-11) ––Low Speed: 72.0 dB(A) per ISO 3744:2010 ––Medium Speed: 78.0 dB(A) per ISO 3744:2010 ––High Speed: 94.4 dB(A) per ISO 3744:2010

• Declared sound power in accordance with EN 300 753 v1.3.1 (2011-11) ––Low Speed: 7.5 dB(A) in accordance with ISO 9296:2010 Medium Speed: 8.1 dB(A) in accordance with ISO 9296:2010 ––High Speed: 9.7 dB(A) in accordance with ISO 9296:2010

Power Supply

• Rated Inputs: ––Low Range: 100-120VAC, 60/50 Hz, 13 A max each power supply ––High Range: 200-240VAC , 60/50 Hz, 13 A max each power supply

• Input Ranges: ––Low Range: 90 -132VAC, 47 - 63 Hz ––High Range: 185 - 264VAC, 47 - 63 Hz

• Power supply input socket IEC 320 C20

• Power cord input plug IEC 320 C19

• Power cord-sets up to 2m (6.5ft) length require minimum 16 AWG (1.0 mm2) copper stranded wire Power cord-sets greater than 2m (6.5ft) length require minimum 14 AWG (1.25 mm2) copper stranded wire (The power supply cord-set wall plug must be appropriately rated and approved for the country of installation)

• Efficiency 90% typical at full load

• DC voltage output range: 47.5 to 48.5 Vdc

• Nominal DC output: ––Low Range: 48 Vdc , 25 A maximum each PSU ––High Range: 48 Vdc , 50 A maximum each PSU

• DC output power: ––2500W @ high range for one PSU (See manual for more than one PS) ––1250W @ low range for one PSU (See manual for more than one PS)

Power Consumption

• Worst case power consumption and heat load (With 10Tbps SFM): ––4,436 W at output of power supplies ––4,929 W at input of power supplies ––16,817 BTU/Hour total heat load

• Worst case power consumption and thermal (With 20Tbps SFM): ––6,532 W at output of power supplies ––7,258 W at input of power supplies ––24,764 BTU/Hour total heat load

• Typical power consumption: * ––5.6 W per 10GbE, 22.5 W per 40GbE